KSh7,900.00

In Stock

Buy Best Plug and play Gpon Router UFiber WiFi (UF-WIFI) from Kisumu Networks Kenya

UFiber WiFi is a robust, high‑performance GPON CPE that offers routing, four LAN ports, and Wi-Fi. It is powered by 24V passive PoE or a 24V, 0.5A power adapter. 

• (1) GPON WAN Port and (4) Gigabit Ethernet Ports 

• 802.11n Wi-Fi 

• 7W Max. Power Consumption

Compare

Description

UFiber WiFi (UF-WFI)

UFiber WiFi is a robust, high‑performance GPON CPE that offers routing, four LAN ports, and Wi-Fi. It is powered by 24V passive PoE or a 24V, 0.5A power adapter. 

• (1) GPON WAN Port and (4) Gigabit Ethernet Ports 

• 802.11n Wi-Fi 

• 7W Max. Power Consumption

Package Contents

UFiber WiFi (UF-WFI) 1
UFiber UF-WIFI
UFiber WiFi (UF-WFI) 2
Screws (Qty. 4)
UFiber WiFi (UF-WFI) 3
Screw Anchors (Qty. 4)
UFiber WiFi (UF-WFI) 4
Power Adapter (24V, 0.5A)

System Requirements

  • Linux, Mac OS X, or Microsoft Windows 7/8/10
  • Web Browser: Google Chrome (Other browsers may have limited functionality)

Before You Begin

Designing your first GPON deployment requires specific knowledge and planning. For information on GPON network design and installation, including important considerations and best practices, refer to:

For details on configuring UFiber devices for the first time to allow ONU LAN ports to provide connectivity, refer to: ubnt.link/UFiber-Initial-Configuration

Hardware Overview

UFiber WiFi (UF-WFI) 5

UFiber WiFi (UF-WFI) 6

UFiber WiFi (UF-WFI) 7PON Port
SC/APC GPON port supports WAN connections of 2.488 Gbps downstream and 1.244 Gbps upstream.
UFiber WiFi (UF-WFI) 8LAN (Ports 1 – 4)
RJ45 Ethernet LAN ports support 10/100/1000 Mbps connections. Port 1 also supports 24V Passive PoE to power the device.
UFiber WiFi (UF-WFI) 9Reset Button
The Reset button serves two functions for the UF-WIFI:

  • Restart Press and release the Reset button quickly. The three signal LEDs will flash amber.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

UFiber WiFi (UF-WFI) 10

UFiber WiFi (UF-WFI) 11Power Port
The Power Adapter connects to this port to provide power.
White Ethernet connection up
UFiber WiFi (UF-WFI) 12Signal LEDs
Off Bootup
UFiber WiFi (UF-WFI) 13 Signal strength: low

≥ -28 dBm

UFiber WiFi (UF-WFI) 14 Signal strength: good

≥ -25 dBm

UFiber WiFi (UF-WFI) 15 Signal strength: strong

≥ -11 dBm

UFiber WiFi (UF-WFI) 16 Signal strength: too low

< -28 dBm

Check the quality of the fiber connection, and calculate the total optical loss of the optical splitters.

UFiber WiFi (UF-WFI) 17 Signal strength: too strong

≥ -8 dBm

Add an optical splitter, or add a 5 or 10 dB optical attenuator.

UFiber WiFi (UF-WFI) 18 No signal

Check the fiber cables and connectors, and ensure that the OLT functions properly.

UFiber WiFi (UF-WFI) 19UFiber WiFi (UF-WFI) 20UFiber WiFi (UF-WFI) 21UFiber WiFi (UF-WFI) 22UFiber WiFi (UF-WFI) 23 No authority

The UF-WIFI has not been authorized or cannot communicate with the OLT. Check passwords and OLT settings.

UFiber WiFi (UF-WFI) 24Ethernet LED
Off Ethernet connection down
White Ethernet connection up

Flashing indicates activity

UFiber WiFi (UF-WFI) 25Power LED
Off Power off
White Power on

Hardware Installation

Wall Mounting

  1. UFiber WiFi (UF-WFI) 26
  2. UFiber WiFi (UF-WFI) 27
  3. UFiber WiFi (UF-WFI) 28
  4. UFiber WiFi (UF-WFI) 29

Connecting Fiber

UFiber WiFi (UF-WFI) 30 WARNING: Never look directly into the ends of fiber or modules. The emitted light could cause damage to the eye.
UFiber WiFi (UF-WFI) 30 WARNING: Until ready for use, keep modules and fiber patch cables covered using the included protective caps to ensure the connections stay clean.
UFiber WiFi (UF-WFI) 32 WARNING: Do NOT connect the device directly to a UFiber GPON module (UF-GP-B+ or UF-GP-C+). Doing so will damage the device optics. Ensure that the device’s received signal level never exceeds -8 dBm. Use a UFiber PLC Splitter to add attenuation as needed.

UFiber WiFi (UF-WFI) 33

Connecting LAN

UFiber WiFi (UF-WFI) 34

Connecting Power

UFiber WiFi (UF-WFI) 35

OR

UFiber WiFi (UF-WFI) 36 Note: 24V Passive PoE is required to power the device.
UFiber WiFi (UF-WFI) 37 WARNING: The PoE switch must comply with the power specifications listed in the Specifications section of this Quick Start Guide.

UFiber WiFi (UF-WFI) 38

Accessing the Configuration Interface

  1. Ensure that your computer (or another host system) is connected to the device.
  2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet.
  3. Launch your web browser. Type http://192.168.1.1 in the address field. Press enter (PC) or return (Mac).UFiber WiFi (UF-WFI) 39
  4. Enter ubnt in the Username and Password fields. Click Login.

UFiber WiFi (UF-WFI) 40

Customize settings as needed. For more information, refer to the UFiber resources, which are available at: http://ubnt.link/UFiber-Support

Specifications

UF-WIFI
Dimensions 126.34 x 126.09 x 31.65 mm
(4.97 x 4.96 x 1.25″)
Weight 190 g (6.70 oz)
Networking Interfaces (1) SC/APC, GPON WAN

(4) Gigabit RJ45, Ethernet LAN

(1) Wi-Fi, 802.11n

Networking Interface Speeds
GPON WAN, ITU G.984 2.4 Gbps Down, 1.2 Gbps Up
LAN 10/100/1000 Mbps
Wi-Fi 300 Mbps
Management Interface In-Band Ethernet

PON

Normal Optical Power Range TX (Class B+): 1.5 to 5 dBm

RX: -28 to -8 dBm

Power Method DC Jack, 24VDC

24V Passive PoE (Pins 4, 5+; 7, 😎

Power Supply 100-240VAC / 50-60 Hz Universal AC/DC
24V / 0.5A
Max. Power Consumption 7W
Supported Voltage Range 20 to 28V
Processor Specs MIPS, 900 MHz
Memory Information 256 MB DDR
Button (1) Reset
Operating Temperature -10 to 45° C (14 to 113° F)
Operating Humidity 10 to 90% Noncondensing
Certifications CE, FCC, IC

Safety Notices

  1. Read, follow, and keep these instructions.
  2. Heed all warnings.
  3. Only use attachments/accessories specified by the manufacturer.
Warning WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Warning WARNING: Do not use this product in location that can be submerged by water.
Warning WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Warning WARNING: CLASS 1 LASER PRODUCT – Do not look into the ends of the fiber optic cable or SFP modules while converters are powered.

Electrical Safety Information

  1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
  2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This radio transmitter has been approved by FCC.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter has been approved by ISED Canada.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-3(A)/NMB-3(A)

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

  1. l’appareil ne doit pas produire de brouillage;
  2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Le présent émetteur radio a été approuvé par ISDE Canada.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

IMPORTANT NOTE

Radiation Exposure Statement

  • This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

AVIS IMPORTANT

Déclaration sur l’exposition aux rayonnements

  • Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un environnement non contrôlé.
  • Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y ait une distance minimale de 20 cm entre l’élément rayonnant et vous.
  • Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.

Australia and New Zealand

Warning Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

Brazil

Nota Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

CE

Book Country List
AT BE BG CY CZ DE DK
EE EL ES FI FR HR HU
IE IT LV LT LU MT NL
PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note Note: This device meets Max. TX power limit per ETSI regulations.

The following apply to products that operate in the 5 GHz frequency range:

Note Note: This device is restricted to indoor use only when operating in the 5150 – 5350 MHz frequency range within all member states.
Note Note: All countries listed may operate at 30 dBm. BFWA member states may operate at 36 dBm.
Note Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band.

Reviews

There are no reviews yet.

Be the first to review “UFiber WiFi (UF-WFI)”

Your email address will not be published. Required fields are marked *

Open chat
Need help?
Hello!
Can we help find what you need faster?