Tripp Lite APSX6048VRNET 6000W APS X Series Inverter/Charger
KSh210,300.00
In StockTripp Lite APSX6048VRNET 6000W APS X Series Inverter/Charger
portable 6000W power source for power tools, computers, audio/video components and other sensitive electronics as a vehicle inverter, standalone AC power source or extended-run UPS. Optional network interface for remote monitoring operation.
Description
Tripp Lite APSX6048VRNET 6000W APS X Series Inverter/Charger
Tripp Lite APSX6048VRNET 6000W APS X Series 48VDC 208/230V AC Inverter/Charger
Buy Tripp Lite APSX6048VRNET 6000W APS X Series 48VDC 208/230V AC Inverter/Charger in Nairobi from Pavuta
Features
Reliable Power for Mobile, Emergency and Remote Sites
- Generates 208/230V pure sine-wave power from 48V battery bank
- Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics
- Designed for easy installation in RVs, fleet vehicles and emergency vehicles
- Functions as vehicle inverter, standalone AC power source or extended-run UPS
- Unlimited runtime with variety of user-supplied batteries
Pure Sine-Wave Power for Normal and Peak Power Demands
- 6000W of continuous power
- 9000W of reserve power up to 1 min.
- 12000W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling
- Automatic overload detector, cooling fan and resettable AC circuit breaker protect unit from damage
- High-current DC input terminals for simple hardwired installation
Automatic Voltage Regulation
- Corrects brownouts and overvoltages without using battery power during battery charging and UPS standby modes
Remote Monitoring Capability
- DB9 port for optional SNMPWEBSOLOHV, which turns the unit into a monitored network device
- Enables network monitoring via SNMP, SSH, Telnet, or the Internet
Automatic Transfer Switching
- Transfer relay switches to inverter power during blackout in 10 or 20 ms
- DIP switches configure high and low voltage auto-transfer
3-Stage 23/90A Selectable Battery Charger
- Serves as battery charger when external 208V or 230V AC power is supplied and powering connected equipment
- Protects battery from overcharging and overdischarging
- Low-battery protection prevents excessive battery depletion
- DIP switches configure wet/gel charging profiles
Remote Generator Starter Jack
- Connects to separate generator with user-supplied cable to automatically cycle generator when battery level is low
Rugged Steel Housing
- Resists moisture, vibration, impact and high-humidity environments
Package Includes
- APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger
- Owner’s manual
Specifications
OVERVIEW
| UPC Code | 037332137838 |
OUTPUT
| Frequency Compatibility | 50 / 60 Hz |
| Pure Sine Wave Output | Yes |
| Output (Watts) | 6000 |
| Nominal Output Voltage(s) Supported | 208V; 230V |
| Output Receptacles | Hardwire |
| Continuous Output Capacity (Watts) | 6000 |
| Peak Output Capacity (Watts) | 12000 |
| Output Voltage Regulation | LINE POWER (AC): Maintains 208/230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 208/230 VAC (+/-5%). |
| Output Frequency Regulation | 50/60 Hz (+/- 0.3 Hz) |
INPUT
| Nominal Input Voltage(s) Supported | 208V AC; 230V AC |
| Recommended Electrical Service | DC INPUT: Requires 48VDC input source capable of delivering 138A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 250A minimum battery system fusing is recommended. |
| Input Connection Type | DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate |
| Voltage Compatibility (VAC) | 208; 230 |
| Voltage Compatibility (VDC) | 48 |
BATTERY
| Expandable Battery Runtime | Runtime is expandable with any number of user supplied wet or gel type batteries |
| DC System Voltage (VDC) | 48 |
| Battery Pack Accessory (Optional) | Â 98-121Â sealed lead acid battery (optional) |
| Battery Charge | Selectable 23 / 90 amp |
| Expandable Runtime | Yes |
VOLTAGE REGULATION
| Voltage Regulation Description | Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels |
| Overvoltage Correction | Input voltages above 252V are automatically reduced by 9% (230V) / Input voltages above 235/245V are automatically reduced by 10% (208V) |
| Brownout Correction | Input voltages from 208V -189V are automatically boosted by 11% (230V) / Input voltages from 188V-166V are automatically boosted 12% (208V) |
| Severe Brownout Correction | Input voltages from 188V – 171V are automatically boosted by 26% (230V only) |
USER INTERFACE, ALERTS & CONTROLS
| Front Panel LEDs | Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. |
| Switches | 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads. Configuration dipswitches set unit voltage, frequency, transfer-time, battery type, and charger-related settings. |
PHYSICAL
| Cooling Method | Dual multi-speed fans |
| Form Factors Supported | Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
| Material of Construction | Metal |
| Shipping Dimensions (hwd / cm) | 40.64 x 36.83 x 59.06 |
| Shipping Weight (kg) | 59.42 |
| Unit Dimensions (hwd / cm) | 25.5 x 49.5 x 22.71 |
| Unit Weight (kg) | 48.31 |
ENVIRONMENTAL
| Relative Humidity | 0-95% non-condensing |
COMMUNICATIONS
| SNMP Compatibility | Optional  SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, SSH, telnet or Internet. |
| Communications Interface | Contact closure; DB9 Serial |
LINE / BATTERY TRANSFER
| Transfer Time (Line Power to Battery Mode) | Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications |
| Low Voltage Transfer to Battery Power | In 230V AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable to 180V). In 208V AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 165V (user adjustable to 175V)-see manual |
| High Voltage Transfer to Battery Power | In 230V AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable to 270 – see manual), In 208V AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 235V (user adjustable to 245V-see manual) |
SPECIAL FEATURES
| TVSS Grounding | Main grounding lug connects inverter/charger to earth or vehicle chassis ground |
| Generator Start Compatibility | RJ-11 port connects to a generator with user-supplied cable to automatically cycle generator when battery level is low |
| Battery Temperature Sensor | RJ-11 port connects to optional battery temperature sensor cable to regulate the charging system based on battery temperature |
CERTIFICATIONS
| Certifications | Tested to EN62040-1 (CE), EN62040-2 (EMC), RoHS compliant |
WARRANTY
| Product Warranty Period (Worldwide) | 2-year limited warranty |
We also have
Related products
-
Victron MultiPlus 800 Inverter/Charger 35A 12V
Input Battery Voltage Range 9.5 – 17 V Nominal AC output Voltage 230 VAC ± 2% Continuous Power Rating 800VA @ 25°C Peak Inverter Efficiency 92% Waveform Pure Sinewave Nominal DC Input Voltage 12V Nominal AC Input Voltage/Frequency 45 – 55 Hz AC input Voltage Range 187-265 VAC Dimensions 375x214x110mm Weight 10kg KSh69,100.00 -
Buy Luminous Eco Volt Inverter 1500VA-24V from Pavuta Telecoms in Kenya at a discounted price
KSh22,500.00 -
Buy Luminous Eco Volt Inverter 900VA-24V from Pavuta Telecoms in Kenya at a discounted price
KSh17,500.00 -
Pure Sine wave inverter with Built in Charger with LCD- 8KW Features
- 48V DC or 230V AC input; 230V, 50 Hz output (hardwired)
- 8KW continuous output, 24000 watts peak output
- Microprocessor controlled Smart UPS & Solar operational mode
- 4-Step Progressive Charging & 7-Battery Type Selector
- Fully compatible for Solar/Wind solutions for Hybrid configuration
- Pure sine wave output with LCD display
- High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
- Quiet, high efficiency operation, high surge capacity and low idle current
- CE Safety
KSh276,000.00 -
MAGNIZON INVERTER APS-1012SW-LCD
- 12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
- 1000 watts continuous output, 2000 watts peak output
- Microprocessor controlled Smart UPS & Solar operational mode
- 4-Step Progressive Charging & 7-Battery Type Selector
- Fully compatible for Solar/Wind solutions for Hybrid configuration
- Pure sine wave output with LCD display
- High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
- Quiet, high efficiency operation, high surge capacity and low idle current
- CE Safety
KSh55,100.00 -
Buy Luminous Home UPS 900VA Eco Watt+ 1050 from Pavuta Telecoms in Kenya
KSh20,200.00
Reviews
There are no reviews yet.