Smart Online Trpp Lite SVT20KX UPS
KSh812,000.00
In StockSmart Online Trpp Lite SVT20KX UPS
2-YEAR LIMITED WARRANTY
Tripp Lite warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for 2 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Tripp Lite will, subject to the foregoing terms and limitations, repair or replace the product, in its sole discretion, as your exclusive remedy for Tripp Lite’s breach of its limited warranty.
PRODUCT REGISTRATION
Description
Smart Online Trpp Lite SVT20KX UPS
Buy Smart Online Trpp Lite SVT20KX UPS from Pavuta in Kenya
SmartOnline SVTX Series 3-Phase 380/400/415V 20kVA 18kW On-Line Double-Conversion UPS, Tower, Extended Run, SNMP Option
Related products
-
Tripp lite SMX 1000LCD UPS
0 out of 5(0)Tripp lite SMX 1000LCD UPS
Output Volt Amp Capacity (VA) 1000 Output Watt Capacity (Watts) 500 Nominal Output Voltage(s) Supported 220V; 230V; 240V Nominal Voltage Details 230V inverter nominal voltage output Frequency Compatibility 50 / 60 Hz Output Voltage Regulation (Battery Mode) +/- 5% Output Receptacles (6) C13 Included Output Power Cables Includes 2 C13 to C14 output power cables KSh27,200.00 -
APC Smart-UPS C 2000VA 2kVA LCD RM 2U 230V SMC2000I-2U
0 out of 5(0)APC Smart-UPS C 2000VA 2kVA LCD RM 2U 230V SMC2000I-2U
Manageability
-
Network manageableProvides remote power management of the UPS over the network.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
Serial connectivityProvides management of the UPS via a serial port.
-
USB connectivityProvides management of the UPS via a USB port (not available on all models).
-
Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
Serviceability
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Resettable circuit breakersEnables a quick recovery from overload events.
-
Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Adaptability
-
Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
-
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Marketing Features
-
Smarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
-
Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
-
Avoids costly power problems by keeping your IT equipment and data safe and availableNetwork grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
-
Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
Availability
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Output
-
Output power capacity
1.3 KWatts / 2.0 kVA
-
Max Configurable Power (Watts)
1.3 KWatts / 2.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 5%
-
Output Frequency (sync to mains)
50 Hz
-
Topology
Line Interactive
-
Waveform type
Sine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)
-
Transfer Time
8ms typical : 10 ms maximum
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
-
Input Connections
IEC-320 C20
-
Input voltage range for main operations
180 – 287V
-
Number of Power Cords
1
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
3hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Runtime
Communications & Management
-
Interface Port(s)
USB
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
-
Emergency Power Off (EPO)
—
Surge Protection and Filtering
-
Surge energy rating
300Joules
-
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
-
Maximum Height
89mm , 8.9CM
-
Maximum Width
480mm , 48.0CM
-
Maximum Depth
470mm , 47.0CM
-
Rack Height
2U
-
Net Weight
26.2KG
-
Shipping weight
30.16KG
-
Shipping Height
250mm , 25.0CM
-
Shipping Width
590mm , 59.0CM
-
Shipping Depth
600mm , 60.0CM
-
Color
Black
-
Units per Pallet
16.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
42.0dBA
-
Online thermal dissipation
81.0BTU/hr
Conformance
-
Approvals
C-tick, CE, EAC, GOST, GS Mark, IRAM, SABS, VDE
KSh127,000.00 -
-
Eaton 9SX UPS 8 KVA RT6U
0 out of 5(0)Eaton 9SX UPS 8 KVA RT6U
High performance Online double-conversion UPS
Performance and Efficiency
• Double-conversion topology. The Eaton 9SX constantly monitors
power conditions and regulates voltage and frequency.
• With up to 95% efficiency in online double-conversion mode
the 9SX provides the highest efficiency level in its class to
reduce energy & cooling costs.
• With a 0.9 power factor the 9SX delivers 28% more power than
UPS in its class. It powers more servers than other UPSs with
equivalent VA ratings and lower power factors.
Availability and Flexibility
• The internal bypass allows service continuity in case of internal
fault. Batteries are hot-swappable from the front panel without
powering down critical systems.
• With its tower or rack/tower versatile form factor the 9SX can be
installed in any environment (rack kit provided as standard on
RT versions).
• Stronger, longer battery life: Eaton ABM® battery management
technology uses an innovative three-stage charging technique
that extends battery life by up to 50%.
• More runtime can be added with external hot-swappable
battery modules, able to run systems for hours if necessary. The
additional battery modules are automatically recognized by the
UPS.
Manageability
• The new graphical LCD provides clear information on the
UPS’s status and measurements on a single screen (in seven
languages). LCD display position can be adjusted to offer the
best viewable angle for tower and rack usage.
• The 9SX can meter energy consumption. kWh values can be
monitored using the LCD or Eaton’s Intelligent Power
Software Suite.
• Load segment control enables prioritised shutdowns of
nonessential equipment to maximise battery runtime for
critical devices. It can also be used to remotely reboot locked-up
equipment or to manage scheduled shutdowns and sequential
start-ups.
• The 9SX offers Serial, USB and relay (dry contacts) connectivity,
plus an extra slot for an optional card (Modbus, Network or
Relay). 9SX also provides Remote Power off function. Eaton’s
Intelligent Power Software is included with each upsKSh425,500.00 -
1-Ph On-line UPS (tower)-1KVA to 3KVA
0 out of 5(0)1-Ph On-line UPS (tower)-1KVA to 3KVA Features
- Wide range of input voltage while input PF>99%
- Output PF of 0.9,more powerful load capability
- Full protection of overvoltage, circuit short and over temperature
- Network/fax/modem surge protection
- LCD/LED display, monitoring all the operation status
- Auto fan speed adjust
- Lighting and surge protection
- Abundant interface:RS232,USB, SNMP, Intelligent Card
Applications
- Critical applications wherever higher reliability is needed
- Medical & lifesaving equipments
- Small Data centers & computer rooms
- ATM closets
- Banking & Telecommunication
- Power Generation & distribution stations
KSh87,000.00 -
Tripp Lite PDUMV20HV
0 out of 5(0)Tripp Lite PDUMV20HV
- Metered single phase 16/20A 200-240V 0U 63.75in / 162cm vertical rackmount PDU
- Two-digit meter reports output current in amps
- 10ft / 3m detachable input cable with NEMA L6-20P plug
- C20 inlet accepts a variety of 16A international cordsets
- 38 output receptacles (6 C19, 32 C13)
- Ready for immediate toolless 0U installation
- 2-year limited warranty
KSh28,100.00 -
Su-Kam 7.5kVA/192V Intelli-Q Pure sine Wave True Online Inverter
The Su-Kam 7.5kva/192V Online UPS is a 1-phase-in to 1-phase-out units, requiring 16 units of 12V batteries (16 x 12V). That’s six batteries more than the regular 7.5kva/120V inverter which runs on a battery bank of 10 units.
KSh302,400.00
Reviews
There are no reviews yet.