KSh600.00
In StockBuy ESCON Connector from Pavuta Telecoms in Kenya
Low insertion loss and high return loss
Free-floating ceramic ferrule
UL-rated plastic housing and boot
Boots in a variety of colors
High precision alignment connector
Description
The ESCON Connector
ESCON stands for Enterprise System Connection. It has 2.5mm ferrules in a duplex format. The ESCON fiber connector was developed by IBM in the early ’90s and brought into the data center for use in IBM mainframes, replacing copper bus and tag cables. They were also used for peripheral hardware such as storage devices and tape drives.
The connector is very sturdy and robust but also has a large footprint. This was okay at the time, as there were not a lot of connections needed. This connector is an icon as it was the first fiber cable connector widely used in data center architecture.
ESCON Connector Features:
Low insertion loss and high return loss
Free-floating ceramic ferrule
UL-rated plastic housing and boot
Boots in a variety of colors
High precision alignment connector
Applications:
Local Area Networks (LANs) and Wide Area Networks (WANs)
Fiber Optic CATV, FTTH, FTTB, FTTP etc
Fiber Optic telecommunication systems
Transmission Mode (ATM)
Fiber Optic Backbone
Military Instrumentation
Related products
-
KSh600.00KSh500.00 -
DescriptionTp-link TL-MC210CS single mode gigabit media convertor
TP-Link TL-MC210CS extends fiber distance up to 15km Also provides switch configuration of Force /Auto transfer mode for FX port TP link tl mc210cs single mode gigabit media convertor converts 1000BASE-LX fiber to 1000Base-T copper media or vice versa For use with single-mode fiber cable utilizing the SC-Type connector
KSh9,000.00 -
Quick features
- Compact design
- NTT-FC compatibility
- High precision alignment
- Low insertion and return loss and back reflection*
Corrosion-resistant body
-
Tp-link TL-MC100CM Multi-Mode Media Converter
- Tp-link TL-MC100CM 10/100Mbps Multi-Mode Media Converter
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
- Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
- Converts 100BASE-FX fiber to 100Base-TX copper media or vice versa
- Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and also front panel status LEDs
- Moreover Tp-link TL-MC100CM media convertor extends fiber distance up to 2km
-
-
Main Features
- Bayonet style housing for easy termination
- Epoxy and epoxy-less versions
- High precision alignment
- Low insertion and return loss and back reflection
Reviews
There are no reviews yet.