Dayliff DDP 60 water pump
KSh7,300.00
In StockDayliff DDP 60 water pump features
MOTORS
Pumps are close coupled to reliable TEFC electric motors designed for continuous operation and are provided with a thermal cutout to protect against electrical overload. They can be connected directly to the mains power supply through a 10A fuse or MCB.
| Motor | |
| Enclosure Class | IP44 |
| Voltage | 1 X 240V |
| Insulation Class | F |
| Speed | 2900rpm |
| Operating Conditions | |
| Pumped Liquid | Thin, clean, chemically non-aggressive liquids without solid particles or fibres |
| Maximum Fluid Temperature | +60 C |
| Maximum Ambient Temperature | +40 C |
| Maximum Suction Lift | 7m at sea level |
| Pump Information | |
| Model | DDP 60 |
| Power (kW) | 0.37 |
| Maximum Operating Current (A) | 2.5 |
| Dimensions – DN1 | 1″ |
| Dimensions – DN2 | 1″ |
| Dimensions (mm) – L | 265 |
| Dimensions (mm) – H | 151 |
| Dimensions (mm) – W | 118 |
| Weight (kg) | 5.3 |
Description
Dayliff DDP 60 water pump
Buy Dayliff DDP 60 water pump from Pavuta Nairobi in Kenya
Features
- The Dayliff DDP peripheral pump is specially designed for all small scale domestic and commercial water supply uses.
- It is of high specification peripheral featuring copper windings,
- High capacity motor and stainless steel housing inserts to ensure free impeller movement
- The pump body is manufactured from cast iron and impeller from brass
Related products
-
Suntron DC Solar Water Pumping
untron solar water pumping system contains;
- Solar PV panels
- Solar DC pump
- Installation accessories
KSh42,000.00 -
Buy Lorentz Solar Submersible Pump System PS2-100 AHRP-14S from Pavuta Telecoms the leading Lorentz water pumps dealer and enjoy same-day delivery
KSh60,500.00 -
Magnizon 7.5HP/5.5KW VFD based smart variable drive for water pumping systems(SVD-005K3)
7.5HP/5.5KW nominal capacity Solar PV operated MPPT based 100-500V DC input and or 3-Ph, 380-415V, 50Hz input (dual input) and 3-Ph 380V-415V, 0-400Hz output vector controlled VFD based smart variable drive for water pumping systems
KSh70,000.00 -
Powerlink Non-Pressurized Solar Water Heater 300 key specifications
• Inner tank: stainless steel SUS304-0.5mm
• Vacuum tube: AL-N/AL/58-1800
• Outer tank: Galvanized steel-0.4mm
• Frame: galvanized steel-1.5mm
• Insulation: Polyurethane
• Reflector: aluminumREMARK:
• Solar heat storage tank diameter (mm): 360/460
• Thickness, insulated(mm):50
• Vent connection(inch):3/4
• Electric heater connection(inch):1
• Water connection(inch):3/4
• Collector angle(degree):20/45KSh112,000.00 -
Pedrollo PKm60 water pump
The Pedrollo PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
The pumps have been remodelled and re-engineered offering the following benefits;
- Pedrollo logo inserted in the body pump
- Quiet operation due to the anti vibration system between shaft and impeller
- More compact
- More efficient motor with low energy consumption and lower operating temperature.
- Special paint which gives improved resistance against environmental corrosion
- Longer life
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTOR
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
KSh10,500.00 -
LORENTZ PS150 C-SJ5-8 Submersible Pump System for 4″ wells
KSh107,100.00
Reviews
There are no reviews yet.