APC SMT3000IC 3000VA LCD 230V Smart-UPS with SmartConnect
KSh155,000.00
In StockAPC SMT3000IC 3000VA LCD 230V Smart-UPS with SmartConnect
Product Description
Features : Cold-start capable; Energy meter;
Green mode; High online efficiency;
Intuitive LCD Status Display; Predictive replace battery date; Pure sine wave output on battery;
Sequenced network shutdown and reboot;
Single switched outlet group; SmartSlot; StruxureWare Central compatible;
Temperature-compensated battery charging; 3 years repair or replace (excluding battery) and 2 year for battery
Description
APC SMT3000IC 3000VA LCD 230V Smart-UPS with SmartConnect
APC SMT3000IC 3000VA LCD 230V Smart-UPS with SmartConnect Output
Max Configurable Power (Watts)
2.7kWatts / 3.0kVA
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Less than 5 %
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages
220, 240
Topology
Line interactive
Waveform type
Sine wave
Transfer Time
6 ms typical : 10 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
151 – 302 Adjustable, 160 – 286V
Number of Power Cords
1
Other Input Voltages
220, 240
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
3hour(s)
Replacement Battery
Expected Battery Life (years)
3 – 5
RBC Quantity
1
Battery Charge Power (Watts)
271Watts
Extendable Run Time
1
Battery Volt-Amp-Hour Capacity
816
Runtime
Efficiency
Communications & Management
Interface Port(s)
SmartSlot, USB
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Yes
Available SmartSlot™ Interface Quantity
1
Surge Protection and Filtering
Surge energy rating
365Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height
17.1inches (435MM, 43.5CM)
Maximum Width
7.8inches (197MM, 19.7CM)
Maximum Depth
21.4inches (544MM, 54.4CM)
Net Weight
115.74lbs. (52.5KG)
Shipping weight
140.43lbs. (63.7KG)
Shipping Height
27.5inches (699MM, 69.9CM)
Shipping Width
15.0inches (381MM, 38.1CM)
Shipping Depth
30.0inches (762MM, 76.2CM)
Color
Black
Units per Pallet
9.0
Environmental
Operating Temperature
32 – 104 °F (0 – 40 °C)
Operating Relative Humidity
0 – 95 %
Operating Elevation
0 – 10000ft (0 – 3048meters)
Storage Temperature
-15 – 45 °C
Storage Elevation
0 – 50000ft (0 – 15240meters)
Audible noise at 1 meter from surface of unit
53.0dBA
Online thermal dissipation
375.0BTU/hr
Conformance
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
Standard warranty
3 years repair or replace (excluding battery) and 2 years for battery, optional on-site warranties available, optional extended warranties available
Sustainable Offer Status
RoHS
Compliant
Product Description
Features : Cold-start capable; Energy meter;
Green mode; High online efficiency;
Intuitive LCD Status Display; Predictive replace battery date; Pure sine wave output on battery;
Sequenced network shutdown and reboot;
Single switched outlet group; SmartSlot; StruxureWare Central compatible;
Temperature-compensated battery charging; 3 years repair or replace (excluding battery) and 2 year for battery
Related products
-
APC BX950UI Back-UPS 950VA 230V AVR IEC Sockets UPS
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Telephone dataline surge protection
Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
KSh15,200.00 - Automatic restart of loads after UPS shutdown
-
APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI
-
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Smart-UPS On-Line Features & Benefits
Serviceability
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Adaptability
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
Manageability
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
Serial connectivityProvides management of the UPS via a serial port.
-
Network manageableProvides remote power management of the UPS over the network.
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
SmartSlotCustomize UPS capabilities with management cards.
Protection
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Marketing Features
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
-
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Print Technical Specification
” width=”12px” height=”14px” data-src=”https://www.apc.com/static/images/print_pdf.png” />
Output
-
Output power capacity
4.5 KWatts / 5.0 kVA
-
Max Configurable Power (Watts)
4.5 KWatts / 5.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 2%
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Other Output Voltages
220, 240
-
Load Crest Factor
3 : 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)(4) IEC 320 C19 (Battery Backup)
-
Bypass
Internal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage
230V
-
Input frequency
40 – 70 Hz (auto sensing)
-
Input Connections
Hard Wire 3 wire (1PH+N+G)
-
Input voltage range for main operations
160 – 275V
-
Input voltage adjustable range for mains operation
100 – 275 (half load)V
-
Other Input Voltages
220, 240
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Included Battery Modules
2
-
Typical recharge time
1.5hour(s)
-
Nominal Battery Voltage
192V
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Extendable Run Time
1
-
Extended Run Options
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Audible and visible alarms prioritized by severity
-
Emergency Power Off (EPO)
Yes
-
Available SmartSlot™ Interface Quantity
1
Surge Protection and Filtering
-
Surge energy rating
480Joules
Physical
-
Maximum Height
432mm , 43.2CM
-
Maximum Width
130mm , 13.0CM
-
Maximum Depth
719mm , 71.94CM
-
Net Weight
54.43KG
-
Shipping weight
63.6KG
-
Shipping Height
330mm , 33.0CM
-
Shipping Width
610mm , 61.0CM
-
Shipping Depth
960mm , 96.0CM
-
Color
Black
-
Units per Pallet
6.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95% non-condensing %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95% non-condensing %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
55.0dBA
-
Online thermal dissipation
931.0BTU/hr
-
Protection Class
IP 20
Conformance
-
Approvals
CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
KSh305,000.00 -
-
APC SRV10KIL Easy On-Line SRV Ext. Runtime 10000VA 230V UPS in kenya
-
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions
-
Includes: (1) DC cable, Basic UPS signalling RS-232 cable, CD with software, USB cable, User manual
KSh400,000.00 -
-
SRT192BP2 APC Smart-UPS SRT 192V 8kVA
Product Description
SRT192BP2
Hot-swappable batteries-Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Battery mounting: Stand alone battery stack
Expected Battery Life (years): 3 – 5
RBC Quantity: 2
KSh98,500.00 -
SRT192RMBPM APC SMART-UPS SRT 192V 5KVA AND 6KVA BATTERY PACK
Product Description
Hot-swappable batteries-Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Battery mounting: Stand alone battery stack
KSh81,200.00 -
APC Smart-UPS C 1000VA LCD 230V SmartSlot UPS
APC 1000VA 1KVA Smart-UPS SMT1000IVersatile, high-density power protection for computer networks, telecommunications, and industrial applications.
1000VA Smart-UPS RT is based on the field-proven, industry-leading Smart-UPS functionality, but features double conversion on-line topology, which delivers tight voltage and frequency regulation, zero transfer time to and from a battery, and input power factor correction.
1000VA Smart-UPS On-Line is capable of supporting loads from 1 kVA to 20 kVA in a rack/tower convertible chassis. The 6 kVA, 8 kVA, and 10 kVA models feature unity output power factor enabling them to support power-hungry blade servers or heavily loaded equipment racks.
When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with multiple battery packs to meet aggressive runtime demands. The included PowerChute Network Shutdown management software provides unattended graceful shutdown of network operating systems. Models 5 kVA to 10 kVA include an integrated network management card for remote management.
1000VA Smart-UPS SPECIFICATION
Overview MODEL NAME APC Smart-UPS 1000VA LCD 230VINCLUDES CD with softwareSTANDARD LEAD TIME Usually Ships within 2 WeeksPRODUCT DISTRIBUTION AlgeriaOutput OUTPUT POWER CAPACITY 700 Watts / 1000 VAMAX CONFIGURABLE POWER (WATTS) 700 Watts / 1000 VANOMINAL OUTPUT VOLTAGE 230VOUTPUT VOLTAGE NOTE Configurable for 220 : 230 or 240 nominal output voltageOUTPUT VOLTAGE DISTORTION Less than 5% at full loadOUTPUT FREQUENCY (SYNC TO MAINS) 47 – 53 Hz for 50 Hz nominalOTHER OUTPUT VOLTAGES 220, 240VLine InteractiveWAVEFORM TYPE Sine waveOUTPUT CONNECTIONS (2) IEC Jumpers (Battery Backup)Input NOMINAL INPUT VOLTAGE 230VINPUT FREQUENCY 50/60 Hz +/- 3 Hz (auto sensing)INPUT CONNECTIONS IEC-320 C14INPUT VOLTAGE RANGE FOR MAIN OPERATIONS 160 – 286 VINPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION 151 – 302VOTHER INPUT VOLTAGES 220Batteries & Runtime BATTERY TYPE Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofTYPICAL RECHARGE TIME 3 hour(s)REPLACEMENT BATTERY RBC6RBC QUANTITY 1Communications & Management INTERFACE PORT(S) RJ-45 SerialAVAILABLE SMARTSLOT™ INTERFACE QUANTITY 1CONTROL PANEL Multi-function LCD status and control consoleAUDIBLE ALARM Alarm when on battery : distinctive low battery alarm : overload continuous tone alarmEMERGENCY POWER OFF (EPO) OptionalSurge Protection and Filtering SURGE ENERGY RATING 459 JoulesFILTERING Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449Physical MAXIMUM HEIGHT 219.0 mmMAXIMUM WIDTH 171.0 mmMAXIMUM DEPTH 439.0 mmNET WEIGHT 18.86 kgSHIPPING WEIGHT 22.77 kgSHIPPING HEIGHT 376.0 mmSHIPPING WIDTH 328.0 mmSHIPPING DEPTH 595.0 mmCOLOR BlackUNITS PER PALLET 12.0Environmental OPERATING ENVIRONMENT 0 – 40 °COPERATING RELATIVE HUMIDITY 0 – 95 %OPERATING ELEVATION 0-3000 metersSTORAGE TEMPERATURE -15 – 45 °CSTORAGE RELATIVE HUMIDITY 0 – 95 %STORAGE ELEVATION 0-15000 metersAUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT 41.000 dBONLINE THERMAL DISSIPATION 100.000 BTU/hrConformance APPROVALS CESTANDARD WARRANTY 3 years repair or replace (excluding battery) and 2 year for batterySustainable Offer Status ROHS CompliantREACH REACH: Contains No SVHCsOTHER ENVIRONMENTAL COMPLIANCE China RoHSKSh47,000.00
Reviews
There are no reviews yet.