APC M10BK-EC Mobile Power Bank 10000mAh Black
KSh5,650.00
In StockAPC M10BK-EC Mobile Power Bank 10000mAh Black
- 2 USB charging ports
- 2.4A charging port ideal for tablets
- 1A charging port ideal for smartphones
- Charge smart devices on the go.
- Slim design
Description
APC M10BK-EC Mobile Power Bank 10000mAh Black
Output
Battery Capacity (mAh)
10000
Battery Output Voltage
5 V
Input
Input Power
8 Watts
APC M10BK-EC Mobile Power Bank 10000mAh Black Batteries & Runtime
Battery type
Li-Poly (Lithium-Polymer)
Battery Volt-Amp-Hour Capacity
37
Physical
Maximum Height
147MM, 14.65CM
Maximum Width
89MM, 8.89CM
Maximum Depth
14MM, 1.35CM
Net Weight
0.27KG
Shipping weight
0.34KG
Shipping Height
230MM, 23.0CM
Shipping Width
128MM, 12.8CM
Shipping Depth
22MM, 2.2CM
Color
Black
Units per Pallet
864.0
Environmental
Operating Temperature
0 – 35 °C
Operating Relative Humidity
0 – 95 (Non-condensing) %
Operating Elevation
0 – 914.4meters
Storage Temperature
0 – 50 °C
Storage Elevation
0 – 914.4meters
Conformance
Approvals
BSMI, CE Mark, EN/IEC 60950-1, FCC part 15 class B
Standard warranty
2 years repair or replace
Sustainable Offer Status
RoHS
Compliant
Related products
-
Buy APC BX500CI Back-UPS 500VA AVR IEC outlets UPS in kenya
Maximum Height
185MM, 18.5CMMaximum Width
115MM, 11.5CMMaximum Depth
213MM, 21.3CMNet Weight
5.2KGShipping weight
5.68KGShipping Height
257MM, 25.7CMShipping Width
190MM, 19.0CMShipping Depth
291MM, 29.1CMColor
BlackKSh7,200.00 -
APC SMC3000I Smart-UPS 3000VA LCD 230V UPS
OutputMax Configurable Power (Watts)
2.1kWatts / 3.0kVAOutput Voltage Distortion
Less than 5 % at full loadOutput Frequency (sync to mains)
50 Hz Sync to mainsTopology
Line interactiveKSh139,999.00 -
APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
Take control of this UPS via USB or serial connectivity. This unit utilises the power of a sealed lead-acid battery with suspended electrolyte. The APC Smart-UPS 5000VA 230V rack mount UPS has a a typical battery recharge time of just three hours. It’s ideal for powering Blade or density optimised servers in a distributed power protection environment as the primary or redundant protection.SpecificationsProduct Description APC Smart-UPS 5000VA 230V Rackmount/Tower Form Factor External 2 U Device Type UPS – external Dimensions (WxDxH) 483 mm x660 mm x 222 mm Weight 97.7 kg Power Output Connectors Details 8 x power IEC 320 EN 60320 C13
2 x power IEC 320 EN 60320 C19Output Waveform Sinewave Surge Energy Rating 480 Joules UPS Technology Line interactive Height (Rack Units) 5U Surge Energy Rating 480 Joules Typical Backup Time at Half Load 26.7 minutes (2000 Watts) Typical Backup Time at Full Load 9.4 minutes (4000 Watts Battery Enclosure Type Internal Input Voltage AC 230 V Output Voltage AC 230 V ± 5% ( 50/60 Hz ) Power Provided 5000 VA Output Connector(s) 4 x power IEC 320 EN 60320 C13 Manufacturer Warranty 2 years warranty Battery Form Factor Internal KSh309,700.00 -
SRT192RMBPM APC SMART-UPS SRT 192V 5KVA AND 6KVA BATTERY PACK
Product Description
Hot-swappable batteries-Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Battery mounting: Stand alone battery stack
KSh81,200.00 -
APC PNOTEPROC8 notebook surge protector 2 pin Connection
Input ConnectionsIEC 60320 C8APC Notebook Surge Protector for AC, phone and network lines, 2 pin connection, 100-240VBasic Protection Against Power Surges for Computers and Electronics- Lightning and Surge Protection
When measured via ANSI/IEEE 587 Category ”A” and “B” tests, the suppression performance of the APC Smart-UPS is superior to virtually all separate surge suppressors.
SurgeArrest Essential Features & Benefits
KSh3,500.00 - Lightning and Surge Protection
-
APC Smart-UPS SRT 5000VA 5kva 230V SRT5KXLI
-
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Smart-UPS On-Line Features & Benefits
Serviceability
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Adaptability
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
Manageability
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
Serial connectivityProvides management of the UPS via a serial port.
-
Network manageableProvides remote power management of the UPS over the network.
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
SmartSlotCustomize UPS capabilities with management cards.
Protection
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Marketing Features
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
-
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Print Technical Specification
” width=”12px” height=”14px” data-src=”https://www.apc.com/static/images/print_pdf.png” />
Output
-
Output power capacity
4.5 KWatts / 5.0 kVA
-
Max Configurable Power (Watts)
4.5 KWatts / 5.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 2%
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Other Output Voltages
220, 240
-
Load Crest Factor
3 : 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)(4) IEC 320 C19 (Battery Backup)
-
Bypass
Internal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage
230V
-
Input frequency
40 – 70 Hz (auto sensing)
-
Input Connections
Hard Wire 3 wire (1PH+N+G)
-
Input voltage range for main operations
160 – 275V
-
Input voltage adjustable range for mains operation
100 – 275 (half load)V
-
Other Input Voltages
220, 240
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Included Battery Modules
2
-
Typical recharge time
1.5hour(s)
-
Nominal Battery Voltage
192V
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Extendable Run Time
1
-
Extended Run Options
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Audible and visible alarms prioritized by severity
-
Emergency Power Off (EPO)
Yes
-
Available SmartSlot™ Interface Quantity
1
Surge Protection and Filtering
-
Surge energy rating
480Joules
Physical
-
Maximum Height
432mm , 43.2CM
-
Maximum Width
130mm , 13.0CM
-
Maximum Depth
719mm , 71.94CM
-
Net Weight
54.43KG
-
Shipping weight
63.6KG
-
Shipping Height
330mm , 33.0CM
-
Shipping Width
610mm , 61.0CM
-
Shipping Depth
960mm , 96.0CM
-
Color
Black
-
Units per Pallet
6.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95% non-condensing %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95% non-condensing %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
55.0dBA
-
Online thermal dissipation
931.0BTU/hr
-
Protection Class
IP 20
Conformance
-
Approvals
CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
KSh305,000.00 -
Reviews
There are no reviews yet.