APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS
KSh790,000.00
In StockBuy APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS from Pavuta in Kenya
Environmental
Operating Temperature
0 – 40 °C
Operating Relative Humidity
0 – 95 (Non-condensing) %
Operating Elevation
0 – 1015.9meters
Storage Temperature
-15 – 40 °C
Storage Elevation
0 – 15240meters
Audible noise at 1 meter from surface of unit
60.0dBA
Online thermal dissipation
900.0BTU/hr
Protection Class
IP20
Description
APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS
E3SUPS20KHB1 Features
Key Features
Run time for loadW
—
Max. Capacity Used
Output power capacity
20.0kWatts / 20.0kVA
Nominal Output Voltage
400V 3PH
Nominal Input Voltage
400V 3PH
Maximum Input Current
37.0A
Easy UPS 3S 20 kVA 400 V 3:3 UPS with internal batteries – 15 minutes runtime
High-efficiency 3-phase UPS with internal batteries providing a runtime of 15 minutes. The UPS features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 20 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. For battery runtime details, see the runtime charts published under the Documents tab.
Includes: Dust filter, Installation guide
APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS
Easy UPS 3S Features & Benefits
Protection
Optional SNMP Card
When you purchase the SNMP card, you can monitor and manage UPS status remotely through the UPS Web interface or through EcoStruxure IT’s cloud-based and on-premise software suites. Click here for more information about EcoStruxure IT.
Parallel capability
Multiple units can be placed in parallel to meet power capacity and redundancy requirements
Wide Input Voltage Window
Saves your battery power for when you really need it – during power cuts!
Replaceable dust filters
protect the UPS in harsh environments.
Convenience
Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.
Easy to install fast
Quickly roll the compact and lightweight UPS into position.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Easy Loop Test
Verifies UPS performance before you connect your load, without the need for a load bank.
Intuitive user interface
The intuitive graphical user interface allows for easy system configuration.
Straightforward installation
Including the input, output, and bypass breakers, as well as the Emergency Power Off (EPO) switch, simplifies installation planning and speeds up deployment.
Technical Specifications
APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS Output
Max Configurable Power (Watts)
20.0kWatts / 20.0kVA
Output Voltage Distortion
Less than 3 %
Output Frequency (sync to mains)
50 Hz Sync to mains, 60 Hz Sync to mains
Other Output Voltages
380, 415
Topology
Double conversion online
Output Voltage THD
< 3% linear load
Output Voltage Tolerance
+/- 1.5 %
APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS Input
Input frequency
45 – 65 Hz
Input voltage range for main operations
304 – 477V
Input Total Harmonic Distortion
Less than 3 % for full load
Other Input Voltages
380, 415
Input Power Factor at Full Load
0.99
Batteries & Runtime
Battery type
VRLA
Included Battery Modules
2
Nominal Battery Voltage
240 V
Battery Slots Empty
1
Replacement battery cartridge note
UPS weight does not include battery weight.
Maximum Available Short Circuit Current
10kAmps
Efficiency
Communications & Management
Interface Port(s)
E3S_Parallel, E3S_TempSensor
APC E3SUPS20KHB1 Easy UPS 3S 20 kVA 400 V 3:3 UPS Physical
Maximum Height
1400MM, 140.0CM
Maximum Width
380MM, 38.0CM
Maximum Depth
928MM, 92.8CM
Net Weight
446.0KG
Shipping weight
494.0KG
Shipping Height
1640MM, 164.0CM
Shipping Width
563MM, 56.3CM
Shipping Depth
1014MM, 101.4CM
Color
White
Environmental
Operating Temperature
0 – 40 °C
Operating Relative Humidity
0 – 95 (Non-condensing) %
Operating Elevation
0 – 1015.9meters
Storage Temperature
-15 – 40 °C
Storage Elevation
0 – 15240meters
Audible noise at 1 meter from surface of unit
60.0dBA
Online thermal dissipation
900.0BTU/hr
Protection Class
IP20
Conformance
Approvals
CE, EAC, IEC 62040-1-1, IEC 62040-2, IEC 62040-3, IEC 62040-4, ISTA 2B, RCM, WEEE
Standard warranty
1 year on-site repair or replace with factory authorized Start-Up
Sustainable Offer Status
RoHS
Compliant
Related products
-
APC 650VA Backups UPS
Product Description
APC Back-UPS 650VA 230V AVR is an award-winning Smart-UPS and is the most popular UPS in the world for servers, storage and networks. Trust to protect critical data and equipment from power problems by supplying clean and reliable network-grade power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.KSh7,800.00 -
APC PNOTEPROC8 notebook surge protector 2 pin Connection
Input ConnectionsIEC 60320 C8APC Notebook Surge Protector for AC, phone and network lines, 2 pin connection, 100-240VBasic Protection Against Power Surges for Computers and Electronics- Lightning and Surge Protection
When measured via ANSI/IEEE 587 Category ”A” and “B” tests, the suppression performance of the APC Smart-UPS is superior to virtually all separate surge suppressors.
SurgeArrest Essential Features & Benefits
KSh3,500.00 - Lightning and Surge Protection
-
Output Output Power Capacity 700 Watts / 1000 VAMax Configurable Power (Watts) 700 Watts / 1000 VANominal Output Voltage 230VOutput Voltage Note Configurable for 220 : 230 or 240 nominal output voltageOutput Voltage Distortion Less than 3%Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1Other Output Voltages 220, 240VCrest Factor 3 : 1Double Conversion OnlineWaveform Type Sine waveOutput Connections (2) IEC Jumpers (Battery Backup) , (6) IEC 320 C13 (Battery Backup)Bypass Built-in BypassInput Nominal Input Voltage 230VInput Frequency 50/60 Hz +/- 5 Hz (auto sensing)Input Connections IEC-320 C14Input voltage range for main operations 160 – 280 VInput voltage adjustable range for mains operation 100 – 280VOther Input Voltages 220 , 240Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofIncluded Battery Modules 1Typical recharge time 3 hour(s)Replacement Battery RBC31RBC Quantity 1Communications & Management Interface Port(s) DB-9 RS-232 , SmartSlotAvailable SmartSlot™ Interface Quantity 1Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass IndicatorsAudible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarmEmergency Power Off (EPO) OptionalSurge Protection and Filtering Surge energy rating 420 JoulesFiltering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449Physical Maximum Height 432.0 mmMaximum Width 85.0 mmMaximum Depth 483.0 mmRack Height 2 UNet Weight 23.0 kgShipping Weight 27.8 kgShipping Height 286.0 mmShipping Width 630.0 mmShipping Depth 594.0 mmMaster Carton Units 1.0Color BlackUnits per Pallet 6.0KSh62,000.00 -
APC 12V 17AH UPS Battery
Long battery life
Designed by APC by Schneider Electric exclusively for APC UPS’s for complete compatibility with the intelligent battery management system.Guaranteed UPS compatibility
Tested and approved to restore the performance of your APC UPS. Maintains UPS safety certifications (UL, VDE, CSA) and lifetime equipment protection policy (as applicable).KSh4,650.00 -
APC BX700UI Back-UPS 700VA 230V AVR IEC Sockets UPS
Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Marketing features
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipmentKSh9,700.00 -
APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
Take control of this UPS via USB or serial connectivity. This unit utilises the power of a sealed lead-acid battery with suspended electrolyte. The APC Smart-UPS 5000VA 230V rack mount UPS has a a typical battery recharge time of just three hours. It’s ideal for powering Blade or density optimised servers in a distributed power protection environment as the primary or redundant protection.SpecificationsProduct Description APC Smart-UPS 5000VA 230V Rackmount/Tower Form Factor External 2 U Device Type UPS – external Dimensions (WxDxH) 483 mm x660 mm x 222 mm Weight 97.7 kg Power Output Connectors Details 8 x power IEC 320 EN 60320 C13
2 x power IEC 320 EN 60320 C19Output Waveform Sinewave Surge Energy Rating 480 Joules UPS Technology Line interactive Height (Rack Units) 5U Surge Energy Rating 480 Joules Typical Backup Time at Half Load 26.7 minutes (2000 Watts) Typical Backup Time at Full Load 9.4 minutes (4000 Watts Battery Enclosure Type Internal Input Voltage AC 230 V Output Voltage AC 230 V ± 5% ( 50/60 Hz ) Power Provided 5000 VA Output Connector(s) 4 x power IEC 320 EN 60320 C13 Manufacturer Warranty 2 years warranty Battery Form Factor Internal KSh309,700.00
Reviews
There are no reviews yet.